Dry Systems
  Space Saver 300
  The Blue River Space Saver 300 Dry Polymer System is designed to make down up to 7 lbs per hour of cationic or anionic dry polymer at a concentration of .3% (.003). This system will operate in either manual or fully automatic mode.   [more..]

  Space Saver 500
  The Blue River Space Saver 500 Dry Polymer System is designed to make down up to 12 lbs per hour of cationic or anionic dry polymer at a concentration of .3% (.003). This system will operate in either manual or fully automatic mode. [more..]
     
    BRT 1000
      The Blue River Technologies1000 Dry Polymer System is designed to make down up to 18 lbs per hour of cationic or anionic dry polymer at a concentration of .3% (.003).  This system will operate in either manual or fully automtic mode.[ more... ]  
     

  Emulsion Systems
  Port-A-Poly
  Blue River Technologies Port-A-Poly liquid make down system is designed to meet the needs of operators with limited flocculent requirements. The standard unit will make down emulsion polymer at a rate of 5 gpm at up to a .6% solution concentration. (Optional E35 diaphragm pump will make down at up to a 1% solution concentration.) This system is also available with a 10 gpm flow rate and the E35 pump. The 10 gpm system will only make down at up to a .5% concentration. [more..]

  Diaphragm Pump
  Blue River Technologies liquid make down systems are designed utilizing the Walchem HV (High Viscosity) series diaphragm pump. These emulsion polymer make down system are available with water flow rates of 5, 10, or 15 gallons per minute. This system is designed to make down emulsion polymers at up to 1% concentrations. [more..]

    Progressive Cavity Pump
      Blue River Technologies Series II liquid make down system is designed for water flow rates of 15, 20 or 25 GPM. This system utilizes a Seepex Progressive cavity metering pump. We can provide other manufactures pumps if desired. The progressive cavity pump is equipped with a gear reduce to prevent over speed of the pump. The pump will deliver up to .25 GPM which allows the user to make down the polymer to concentration levels of up to 1%. (Other gear ratios are available with higher outputs.) [more..]
 
1302 Garner Street, New Castle, IN 47362 | 765388-2161 (ph) | 765388-2406 (fax) | mconwell@nltc.net